Home Assistant su Raspberry Pi: various installations, things to do

3 minutes of reading

Raspberry logoAs explained also in the card dedicated to "first steps", Home Assistant it's a HUB free staff extremely versatile and installable in many different operating environments.

When you decide to make it work on a Raspberry Pi (wisely, for a whole series of reasons sacrosanct) then the choices regarding how to implement it are essentially three (four, if we consider the "shortcut"):

  • HASSIO
  • HASSIO on Docker
  • Raspbian + Home Assistant (Or Hassbian, the shortcut)

The first possibility, HASSIO, is that dedicated to the mass. This is a distribution of Home Assistant which allows you to install it with one simple gesture, and makes Rasberry Pi completely enslaved to it. In practice Raspberry becomes Home Assistant. You don't have to think about much, just configure Home Assistant for the profirst home automation. HASSIO it is a very convenient distribution for the little practical of technology, above all because - besides being turnkey - it offers an internal store (free, rest assured) that allows you to install additional components with a simple click.

The second, HASSIO on Docker, is perhaps the best: it plans to install the traditional Raspberry operating system (Raspbian) and, through a trick offered by virtualization technologies, to install on it HASSIO with all its advantages.

The third, Raspbian +Home Assistant, is the one dedicated to people with a slightly higher degree of preparation. It is not necessary to be an atomic scientist, but certainly a basic preparation helps a lot. This approprovides the installation of the traditional Raspberry operating system (Raspbian), its configuration, then the manual installation of Home Assistant.
The advantage of this type of installation is that Home Assistant runs as a "single proaccess, leaving the administrator the possibility of supporting him later with other software. This type of installation does not make available user the additional functionality of internal store provided by HASSIO. Any additional components will also be installed manually.

The fourth, Hassbian, is equivalent to the third, but it allows to skip the boring preliminary phase, or rather that of the installation of the operating system, of its configuration, finally of the configuration of Home Assistant. For the rest, see the same considerations.


Let us now what is the checklist of things to do in case you want to implement Home Assistant on Raspbian, which is the chosen path:

ApproccioPassi baseLink alla guida
HASSIO

  • Download the free image HASSIO
  • Using a computer, copy this image to the SD card of the Raspberry Pi
  • Insert the SD into the Raspberry Pi and turn it on
  • Wait up to 20 minutes for auto-configuration
  • Connect to proprio Home Assistant via browser
GUIDA
  • Install the add-on essential
GUIDA
HASSIO on Docker

  • Download the free Raspbian image
  • Using a computer, copy this image to the SD card of the Raspberry Pi
  • Insert the SD into the Raspberry Pi and turn it on
  • Activate SSH and VNC
GUIDA

GUIDA Headless (no need for keyboard, mouse, video)

  • Install Docker + HASSIO
GUIDA
  • Install the add-on essential
GUIDA
Raspbian + Home Assistant



  • Download the free Raspbian image
  • Using a computer, copy this image to the SD card of the Raspberry Pi
  • Insert the SD into the Raspberry Pi and turn it on
  • Activate SSH and VNC
GUIDA

GUIDA Headless (without keyboard, mouse, video)

  • Install Home Assistant
  • configuration Home Assistant as an auto-boot service
  • Connect to proprio Home Assistant via browser
GUIDA
  • Initial configuration
GUIDA
  • Manage everything using the various commands
GUIDA
  • First configuration of proprio HUB
GUIDA
  • Checklist: things to do to connect to home automation away from home
GUIDA
  • Check remotely Home Assistant su Raspberry Pi in complete safety
GUIDA
  • Automatically update DuckDNS from profirst Raspberry
GUIDA
  • (Optional) Install Mosquitto MQTT Broker
GUIDA
  • (Optional) Configure the MQTT client features
GUIDA
Hassbian


  • Download the free image Hassbian
  • Using a computer, copy this image to the SD card of the Raspberry Pi
  • Insert the SD into the Raspberry Pi and turn it on
  • Connect to proprio Home Assistant via browser
GUIDA
  • Initial configuration
GUIDA
  • Manage everything using the various commands
GUIDA
  • First configuration of proprio HUB
GUIDA
  • Checklist: things to do to connect to home automation away from home
GUIDA
  • Check remotely Home Assistant su Raspberry Pi in complete safety
GUIDA
  • Automatically update DuckDNS from profirst Raspberry
GUIDA
  • (Optional) Install Mosquitto MQTT Broker
GUIDA
  • (Optional) Configure the MQTT client features
GUIDA


Home Assistant Official LogoATTENZIONE: remember that there is on our FORUM community an ad hoc section dedicated to Home Assistant, for any doubt, question, information on the specific merit of these components.


Please comment below